Holytek 36” lacquer sander with fixed table -- 15HP motor, variable speed 6 to 25m/min  

-- Maximum working width: 915mm

-- Maximum working thickness: 130mm

Profile Edge Sander CFS1 

-- Oscillating sanding belt with variable speed by frequency variation. 

-- Limit switch with timer for the start and end of the sanding cycle, thus avoiding the deformation of the corner of the workpiece.

-- Tiltable sanding unit -30° to +90° with mechanical digital tilt display.  

Semi-Automated Trimmer - CFS-100 -- Ideal for finger jointing (for imperfections) and for bulk preparation of materials. -- Allows saving of more than 5% of wood materials thanks to its precise cutting. -- Machine design with specifications exclusive to Holytek Canada, such as roller positioning pressers with steering wheel directly accessible to the operator without movement and with positioning indicator mechanical numeric of workpiece thickness.

Holytek 450PM edgebander with pre-milling -- Interchangeable glue pot with 6 heating elements and motorized spreading rollers

-- Thermoregulator with automatic stand-by and glue temperature indicator

-- Keys with LED indicator lights for selection of the different machining units by encoder placed on the transmission system for driving the panel Learn more.

10" Matcher - ED-10 -- Machine specially designed to make the male and female parts of floor components or for assembling finger-jointed pieces of wood.

-- Machine maximizes space thanks to its linear drive.

-- High-speed hydraulic drive with five polyurethane rollers. Three pressure rollers on each side, pressing the parts against the side guides, guaranteeing operational accuracy. Learn more.  

Single edger with pneumatic guide - FR-12H-PGF -- Central lubrication system with a digitally programmed pump to ensure permanent lubrication between the chain and the rails. The chain stops completely when the lubrication is insufficient, thus preserving the life of the chain and the rails. -- Pneumatic rip fence with quick positioning needle. -- Two optical detectors integrated into the guide The first lowers the non-return fingers into the table during positioning. The second locks the guide in position and releases the non-return fingers.

-- Automatic return of the rip fence to the initial position after cutting, thus increasing production efficiency. Learn more.  

Multiple edger - GRS-300A -- Cast iron frame for maximum rigidity and stability.

-- Electric shaft and deck elevation for easy adjustments and precise positioning.

-- Variable drive speed by frequency converter ranging from 6 to 34 m/min Learn more.  

25" high double-sided automatic planer - HC-2025HD -- Rugged cast iron frame and table construction eliminates vibration during operation.

-- Steering wheel with side handle with mechanical digital display to allow micro-adjustable elevation of the planing table.

-- Intersecting presser fingers safely facilitates the machining of very narrow parts (6 mm) or of small dimensions.

DRUMMONDVILLE, Quebec -- Holytek Canada will present a big lineup of woodworking machinery during Salon Industriel du Bois Ouvré (SIBO), October 27-29 at the Centrexpo Cogeco.

Holytek imports, distributes, and services high-quality equipment used in the processing of solid wood and composite wood panels. 

See these and other machines from Holytek at booth #501. Learn more at holytekcanada.com.

About Salon Industriel du Bois Ouvré (SIBO) SIBO, historically the most important event for Quebec’s secondary wood products industry, provides an exclusive opportunity for manufacturers and distributors of woodworking machinery, tooling, software, cabinet hardware, lumber and board products, and much more to connect with manufacturers representing Quebec’s $8.2 billion wood products economy.

For exhibit space and sponsorship inquiries, contact Rob Roszell at rob.roszell@woodworkingnetwork.com or Harry Urban at harry.urban@woodworkingnetwork.com. View SIBO 2022 exhibitor prospectus.

More upcoming Woodworking Network events Executive Briefing Conference (EBC), Sept. 15-17, 2022, The Broadmoor, Colorado Springs, Colo.

Wood Pro Expo Lancaster (WPEL), Oct. 13-14, 2022, Spooky Nook Sports Center/Warehouse at the Nook, Manheim, Pa.

Closets Conference & Expo (CCE) co-located with Wood Pro Expo Florida (WPEFL), April 12-14, 2023, Palm Beach County Convention Center, West Palm Beach, Fla.  Wood Machinery & Supply Conference & Expo (WMS), Nov. 2-4, 2023, International Centre, Mississauga, Ontario.

Have something to say? Share your thoughts with us in the comments below.

Rich Christianson is the owner of Richson Media LLC, a Chicago-based communications firm focused on the industrial woodworking sector. Rich is the former long-time editorial director and associate publisher of Woodworking Network. During his nearly 35-year career, Rich has toured more than 250 woodworking operations throughout North America, Europe and Asia and has written extensively on woodworking technology, design and supply trends. He has also directed and promoted dozens of woodworking trade shows, conferences and seminars including the Cabinets & Closets Conference & Expo and the Woodworking Machinery & Supply Conference & Expo, Canada’s largest woodworking show.

Sign Up for Woodworking Network Newsletters

Get the latest headlines delivered to you daily Subscribe